To bypass a zone on a Brinks alarm system, follow these steps:
- Press the (OPTIONS) button repeatedly until the display reads "(Bypass, Enter Zone #)".
- Enter the zone number that you want to bypass.
- The display will flash the zone number and then show "(Ready, Bypass)".
- Press (ON) to arm the system with the specified zones bypassed.
Bypassing a zone essentially ignores that specific sensor during the arming process. This can be useful if a door or window sensor is malfunctioning or needs to be left open temporarily.
Important Considerations:
- Security Implications: Bypassing a zone reduces the overall security of your system. Only bypass zones when absolutely necessary.
- Temporary Solution: Bypassing should be considered a temporary workaround. Address the underlying issue with the bypassed zone (e.g., repair or replace the sensor) as soon as possible.
- System Variations: While the general process is similar, specific wording and button labels might vary slightly depending on your exact Brinks alarm panel model. Refer to your Brinks alarm system manual for the most accurate instructions for your specific system.
- Professional Monitoring: Keep in mind that bypassing zones might affect how your Brinks system communicates with the monitoring center. Contact Brinks or your monitoring provider if you have concerns.
