Removing shipping bolts from appliances like washing machines is a necessary step before use. Based on the provided reference, the process involves removing the bolt, covering the resulting hole, and storing the bolt safely.
Key Steps for Removing Shipping Bolts
Shipping bolts are designed to secure internal components during transit and must be removed before operating the appliance. The specific method may vary slightly by model, but the general principle involves loosening and then extracting the bolt.
Step 1: Remove the Bolt
The reference highlights the final action for removing the bolt. After any necessary loosening (often with a wrench), the bolt is then extracted.
Based on the reference, the action is to "slide it. Out". This implies pulling the bolt straight out once it is sufficiently loosened or detached from its anchoring point.
Step 2: Cover the Holes
Once the shipping bolts are removed, they leave open holes in the back of the appliance. These holes need to be covered.
According to the reference, you should "fill the remaining holes with the supplied. Covers". Your appliance should come with plastic caps or plugs designed specifically for this purpose. Inserting these covers prevents debris from entering the appliance and maintains its appearance.
Important Tip: Keep the Bolts
Do not discard the removed shipping bolts. They are essential if you ever need to transport the appliance again.
The reference advises, "Make sure to keep your shipping bolts in case you ever need to move. Your washer." Store them in a safe, memorable place, perhaps taped inside the washer lid or in a drawer, so you can easily locate them if needed for future relocation.
By following these steps, you can properly remove the shipping bolts from your appliance based on the information provided in the reference.
