Cleaning the filter in your Electrolux front load washer is essential for optimal performance and preventing drainage issues. Here's how to do it effectively.
The primary way to clean your Electrolux front load washer filter involves removing debris using basic cleaning tools and soaking it if necessary.
Step-by-Step Cleaning Process
Once you have accessed and removed the filter (refer to your washer's manual for specific instructions on filter location and removal), you can proceed with the cleaning steps:
- Initial Cleaning: Use a toothbrush, dish brush, or dishcloth to remove debris from the filter. Focus on getting rid of lint, coins, or other small items that may have collected.
- For Hard-to-Clean Debris: If you encounter stubborn grime or buildup, soak the filter in hot water and dish soap for 10 minutes. After soaking, clean it again thoroughly with a brush or cloth.
- Addressing Mold, Mildew, or Residue: If you find stuck-on detergent residue, mold, or mildew on the filter, clean and soak the filter in distilled white vinegar. Vinegar is effective at breaking down these types of buildup and odors.
Here's a quick summary of cleaning methods based on the type of dirt:
| Debris Type | Recommended Cleaning Method |
|---|---|
| Standard Debris (Lint) | Use a toothbrush, dish brush, or dishcloth. |
| Hard-to-Clean Debris | Soak in hot water & dish soap for 10 mins, then brush/cloth. |
| Residue, Mold, Mildew | Clean and soak in distilled white vinegar. |
Regularly cleaning this filter, often called a drain pump filter or coin trap, helps maintain your washer's efficiency and prevents potential problems. Always ensure the area around the filter is clean and dry before reinserting the filter and closing the access panel.
