Cleaning your automatic soap dispenser helps maintain its performance and prolong its lifespan. Based on recommendations for addressing slow performance and maintaining longevity, a simple approach involves using hot water and properly diluting your soap.
Addressing Performance Issues: The Hot Water Method
If you notice that your automatic soap dispenser is starting to dispense slowly or seems clogged, a simple cleaning method can help restore its functionality.
According to maintenance tips, if the performance begins to slow down, fill the dispenser with hot water and run the water through to clean. This process helps to clear out any soap residue or buildup that might be impeding the flow.
Here's how to perform the hot water flush:
- Empty the dispenser: Remove any remaining soap from the reservoir.
- Fill with hot water: Carefully fill the dispenser reservoir with hot (but not boiling) tap water.
- Run the cycle: Activate the dispenser repeatedly to run the water through to clean. Continue until the water coming out is clear and the flow improves.
- Rinse: Empty the hot water and potentially repeat with cool water to ensure all residue is flushed.
- Refill: Once cleaned, you can refill the dispenser with your diluted soap mixture.
This method is effective for tackling clogs and improving dispensing speed caused by dried soap buildup.
Maintaining Longevity: Diluting Your Soap
Beyond reactive cleaning, proactive maintenance can significantly extend the life of your automatic soap dispenser.
To maintain the longevity of your soap dispenser we recommend diluting soap with water using a 70/30 proportion. This means using 70% liquid hand soap and 30% water when refilling your dispenser.
Why dilute?
- Prevents Clogging: Thicker, undiluted soap can be harder for the pump mechanism to handle and is more likely to dry and cause clogs.
- Reduces Strain: Diluted soap puts less strain on the dispenser's pump and motor over time.
- Optimizes Dispensing: Many automatic dispensers are designed to work best with thinner, diluted liquids.
When diluting, mix the soap and water thoroughly before pouring the mixture into the dispenser reservoir.
Quick Reference Guide
Here's a simple table summarizing the key actions for cleaning and maintaining your automatic soap dispenser:
| Problem/Goal | Recommended Action | Details |
|---|---|---|
| Performance Slows | Hot Water Flush | Fill with hot water, run water through. |
| Maintain Longevity | Dilute Soap with Water | Use a 70/30 proportion (70% soap, 30% water). |
By following these straightforward steps, you can keep your automatic soap dispenser working smoothly and effectively.
