Applying Hybrid Ceramic Liquid Wax, based on the reference provided, involves allowing the product to set for a short period before wiping it off to achieve a streak-free finish.
Understanding Hybrid Ceramic Liquid Wax
Before diving into the application, it's helpful to understand the product type. The reference specifically discusses applying a Hybrid Ceramic Liquid Wax. This suggests a product that combines traditional wax components with ceramic (SiO2) technology in a liquid format, designed for ease of application and durable protection.
Detailed Application Steps
Based on the provided reference, the process for applying Hybrid Ceramic Liquid Wax focuses on timing and testing for readiness before removal.
Here are the key steps:
- Apply the Product: While the reference doesn't detail the initial application method (e.g., spraying, wiping on with an applicator), the standard procedure for liquid waxes and sealants is to apply a thin, even layer to a panel.
- Allow Setting Time: After applying the product to a section, you need to allow it to set or cure slightly. According to the reference, you should wait 2 to 3 minutes. This allows the solvents to evaporate and the protective elements to begin bonding.
- Check for Readiness: To determine if the product is ready for removal, perform a simple test. Swipe your finger through the product on the surface.
- Evaluate the Test: Observe the area where you swiped your finger. The reference states you should check if it's streak free.
- Remove the Product: If the finger swipe test shows that the area is streak free, then you can proceed to remove the remaining product from the panel.
- Use the Correct Towel: For removal, the reference indicates using a microfiber towel (referred to as "mark fiber. Towel"). Use a clean, dry microfiber towel to gently buff the surface clean.
Checking for Readiness: The Finger Swipe Test
The finger swipe test after 2 to 3 minutes is a crucial step highlighted in the reference.
- Purpose: This test helps you gauge if the product has set adequately to be removed cleanly without streaking or smearing.
- Execution: Simply use a clean finger to swipe a small, inconspicuous line through the product on the surface.
- Result: If the swipe leaves a clear line with no streaks or haze, the product is ready for buffing. If it smears or is difficult to wipe away cleanly with just your finger, it may need a little more time to set.
Removal Process with a Microfiber Towel
Once the product is ready, using the right towel is essential.
- Use a clean, high-quality microfiber towel.
- Gently wipe away the product, using a flipping or folding technique to ensure you are always using a clean surface of the towel.
- Buff the surface until all residue is removed and the finish is clear and glossy.
Key Benefit: No Hazing
A notable characteristic mentioned in the reference is that this product won't haze ("won't Hayes when you're finished"). Hazing is a common issue with some waxes or sealants where a cloudy film appears after drying, requiring additional effort to remove. The absence of hazing simplifies the removal process.
In summary, applying Hybrid Ceramic Liquid Wax involves a short wait time, a specific finger-swipe test for readiness, and removal with a microfiber towel once it's streak-free and ready.
