While the provided context doesn't offer specific instructions, here's a general guide on how to use a manual baby scale, assuming it operates using a sliding weight mechanism:
-
Prepare the Scale: Place the scale on a flat, stable surface. Ensure the weighing pan or cradle is securely attached and clean.
-
Zero the Scale: Before placing the baby on the scale, adjust the sliding weights until the scale is balanced at zero. This might involve a small adjustment knob or sliding the weights until the indicator shows zero.
-
Place the Baby on the Scale: Gently place the baby in the center of the weighing pan or cradle. Try to keep the baby as still as possible.
-
Read the Weight: Slide the weights until the scale balances again. The weight will be indicated by the position of the weights on the scale's beam. Read the weight carefully, noting both the large weight and any smaller increments.
-
Record the Weight: Write down the weight immediately to avoid forgetting it.
-
Remove the Baby: Carefully remove the baby from the scale.
Important Considerations:
- Safety First: Never leave a baby unattended on the scale. Always keep a hand on the baby to prevent falls.
- Cleanliness: Clean the scale and weighing pan before and after each use to maintain hygiene.
- Calibration: Periodically check the calibration of the scale using a known weight.
- Read the Instructions: Always refer to the specific instructions that came with your particular manual baby scale, as operating procedures can vary slightly.
