Based on the limited reference, installing a fixed bath screen generally involves these steps:
- Fit the rubber seal: Attach the rubber seal to the bottom edge of the glass bath screen. This creates a watertight barrier when the screen is installed.
- Insert into the channel: Carefully insert the bath screen into the U-channel or mounting profile that will secure it to the wall and the bath's edge.
- Position: Adjust the position of the screen so that it sits correctly on the bathtub rim.
Important Considerations (based on general knowledge, as the provided reference is minimal):
- Preparation is key: Before you start, ensure the bath rim and wall are clean and dry. Mark the position of the wall profile on the wall using a spirit level.
- Sealing: After positioning the screen, use silicone sealant along the edges where the screen meets the wall and the bath. This prevents water from escaping. Apply sealant smoothly for a professional finish.
- Fixing the Channel/Profile: The U-channel or wall profile typically needs to be screwed to the wall. Ensure you use appropriate screws and wall plugs for your wall type. Some profiles may also adhere to the wall using a strong adhesive.
- Safety First: Wear safety glasses and gloves throughout the installation process. Glass can be sharp, and silicone sealant can irritate the skin.
- Consult Instructions: Always refer to the specific installation instructions provided by the manufacturer of your bath screen. The exact steps may vary slightly depending on the model.
