How to Remove Bathtub Appliques
Removing bathtub appliques can be a simple task, often achievable with common household items like vinegar, which helps loosen the adhesive.
One effective method involves using warm vinegar. According to one technique, you can warm one half cup of vinegar in the microwave for 15 seconds. This slightly heated vinegar can help break down the glue bonding the appliques to the tub surface.
Step-by-Step Guide to Removing Bathtub Appliques with Vinegar
Here is a detailed breakdown of the vinegar method:
- Prepare the Vinegar: Measure out half a cup of regular white vinegar.
- Warm It: Warm one half cup of vinegar in the microwave for 15 seconds. Be careful not to overheat it; it should be warm, not boiling.
- Soak the Cloth: Soak a cloth in the vinegar. Ensure the cloth is saturated with the warm vinegar.
- Apply to Applique: Place the cloth over the decal (applique). Make sure the entire applique is covered by the vinegar-soaked cloth.
- Let It Work: Leave the cloth in place for 10 minutes. This duration allows the acid in the vinegar to penetrate and loosen the glue.
- Peel Off: Once the applique is fully saturated with the vinegar, the bathtub decal should peel right off. You may need to gently lift an edge to start.
- Clean Up: After removing the appliques, thoroughly wash and rinse the tub to remove any remaining adhesive residue and the smell of vinegar.
Using warm vinegar is a non-toxic and readily available option for tackling stubborn bathtub appliques, making the removal process much easier.
