To remove a bathtub control, typically you will need to pry off a decorative cap and then unscrew a screw beneath it.
Here's a step-by-step guide based on the provided reference:
Removing a Bathtub Faucet Handle
Step 1: Prying off the Cap
- Many bathtub controls have a decorative cap covering the screw that secures the handle.
- Use a small, flat tool, like a screwdriver, to gently pry the cap off.
- The cap might be a little stubborn, so apply consistent and careful pressure.
- Work around the edge of the cap, prying a little at a time until it pops off.
Step 2: Unscrewing the Screw
- Once the cap is removed, you will see a screw.
- Use the appropriate screwdriver (usually a Phillips head) to untwist the screw.
- Once the screw is fully removed, the handle or control should come free.
| Step | Action | Tool(s) |
|---|---|---|
| 1 | Pry off the decorative cap | Flat screwdriver or similar |
| 2 | Untwist and remove the screw underneath | Phillips head screwdriver |
Note: The specific design of bathtub controls can vary, so these steps are generally applicable. Always be gentle and avoid forcing any parts.
