To measure for Roman blinds, you first decide where the blind will hang, then measure the width and drop of your window at multiple points, using the smallest measurement for both width and drop to ensure a proper fit.
Accurate measurements are crucial for ensuring your Roman blinds fit and function correctly, whether they are installed inside or outside the window recess. Following a simple, consistent process helps you gather the necessary figures.
Step-by-Step Measurement Guide
Based on the provided reference, here are the steps to measure for Roman blinds:
- Decide where your blind will hang. This initial decision dictates whether you will measure inside the window recess or the area outside it. Measuring inside the recess provides a neat fit within the frame, while measuring outside covers the entire window and potentially the frame.
- Measure the width across the top, middle and bottom of your window. Windows are often not perfectly square, so taking measurements at three different points helps identify any inconsistencies.
- Use the smallest measurement as your final figure. Selecting the smallest width ensures that the blind will fit into the narrowest point of your measured area without catching or rubbing.
- Measure the drop across the left, center and right. Similar to width, measure the height (drop) from where the blind will be fitted down to where it will finish, checking at three positions.
- Use the smallest option as the final number. Choosing the smallest drop prevents the blind from pooling on the windowsill or floor when fully lowered, ensuring a clean look.
By taking these measurements carefully, you gather the essential dimensions needed to order or make your Roman blinds. Remember that depending on whether the blind hangs inside or outside the recess, you may need to make slight adjustments to these final figures (like subtracting a few millimetres for recess fit or adding for outside coverage), but the foundational measurements of the window area are obtained using the steps above.
Summary of Measurements Needed:
- Width: Smallest measurement taken at the top, middle, and bottom.
- Drop: Smallest measurement taken at the left, center, and right.
