To adjust cabinet hinges that open too far, you can use restrictor clips designed for this purpose.
Restrictor Clips
These clips, often manufactured by Blum, are specifically designed to limit the opening angle of cabinet doors. Here's how they work:
- Design: The clips feature a cove, which interfaces with a barrel located on the inside of the hinge.
- Function: When the door is opened, the restrictor clip engages with the barrel, stopping the door at a predetermined angle, thereby preventing it from swinging too far open.
Step-by-Step Guide
While the provided references don't give a detailed installation guide, here is a basic understanding of the steps, based on the description:
- Identify the hinge: Look for the hinge barrel where the restrictor clip will attach.
- Position the clip: Align the cove of the restrictor clip with the barrel on the hinge.
- Install the clip: Once aligned, the clip should secure into place. Depending on the type of clip, it might snap or slide in, or might need to be screwed in. Ensure it is securely attached.
- Test: Open and close the door to test the function of the restrictor clip. Check to see that the door stops at the intended angle.
- Adjust as needed: If further adjustments are needed, you might be able to change the position of the clip slightly, or a different sized clip may be required.
Important Notes
- Compatibility: Ensure you use restrictor clips that are compatible with your specific type of hinge.
- Manufacturer: Blum is a manufacturer of these restrictor clips, but other companies may produce similar devices.
- Installation: Always follow the manufacturer's instructions to install the restrictor clips properly.
By using restrictor clips, you can effectively control the opening of cabinet doors and prevent them from opening too far, which could potentially damage the door, hinges, or adjacent items.
