Fixing a soft close hinge can involve various steps depending on the issue, but based on the provided reference, one common method shown is to re-install a soft close attachment that may have become loose or detached.
Some cabinet soft close systems utilize separate attachments, like the Blumotion seen in the reference, that clip onto or slide onto the hinge. If your soft close hinge isn't working, it might be because this attachment has come off. The reference demonstrates how to put it back into place.
The process is straightforward and often requires no tools.
Here are the steps for re-installing the soft close attachment as shown in the reference:
- Locate the soft close attachment. This is often a small cylinder or mechanism designed to clip onto the hinge arm.
- Align the attachment with the correct position on the hinge. Different hinge types and attachments will have specific points where they connect.
- Using your finger, slide the attachment firmly into its designated spot on the hinge. The reference specifically mentions: "And our finger and we're just going to slide it. Right back into place."
- Once the attachment is securely seated, it should be installed. As the reference notes: "And there you go. That's it now our blue motion our soft close is installed."
This re-installation can restore the soft closing function if the problem was simply a loose attachment.
Other Soft Close Hinge Issues
While re-installing an attachment addresses one specific problem, soft close hinges can experience other issues such as:
- The soft close mechanism within the hinge failing.
- The hinge needing adjustment to control the closing speed or door alignment.
- Physical damage to the hinge or door.
These issues typically require different solutions, like adjusting screws on the hinge or replacing the hinge entirely, which are not covered by the provided reference. However, ensuring any separate soft close attachments are correctly installed, as shown in the reference, is a good first step if your soft close isn't working.
| Problem Illustrated in Reference | Solution Illustrated in Reference |
|---|---|
| Soft close attachment loose/off | Slide it back into place using your finger |
Re-installing the soft close attachment is a simple fix when that specific piece has become dislodged, restoring the desired soft closing motion.
