Measuring upper corner cabinets accurately is crucial for proper fitting, planning, and maximizing space in your kitchen. The standard method involves measuring from the corner outwards along each side of the cabinet.
Step-by-Step Measurement
According to sources like cut2size.ca, the process for measuring corner cabinets focuses on determining their dimensions from the corner point. Here's how to do it:
- Identify the Corner Point: Locate the inside corner point where the two walls meet behind the cabinet.
- Measure Along One Side: Place the end of your measuring tape directly at the corner point of one of the cabinet's backsides.
- Extend the Tape: Pull the tape straight out along the back edge of the cabinet until you reach the side edge of the cabinet box. Record this measurement.
- Measure Along the Other Side: Repeat the procedure for the opposite side of the corner. Place the tape end at the same corner point and pull it straight out along the other back edge to its side edge. Record this measurement as well.
- Important Note: These measurements essentially give you the dimensions required in the corner along the wall, often referred to as the cabinet's "pull." For example, a "36x36" corner cabinet typically requires 36 inches along each wall from the corner, even though the cabinet face might be narrower (like 24 inches). Always confirm the specific dimensions needed for the cabinet style you are working with.
Why This Measurement Method?
Understanding the dimensions required along the walls from the corner is essential for:
- Layout Planning: Ensuring the corner cabinet fits correctly and integrates smoothly with adjacent cabinets.
- Avoiding Dead Space: Accurate measurement helps in selecting or installing cabinets that utilize the corner space efficiently, minimizing wasted or inaccessible areas, which is a key consideration referenced in discussions about corner cabinet sizing.
- Ordering and Installation: Providing precise measurements to manufacturers or installers ensures the correct cabinet is ordered and installed without issues.
By following this method, you can obtain the critical dimensions needed to work effectively with upper corner cabinet spaces.
