To remove condensation from your Blink camera, the primary steps involve drying it out thoroughly indoors and then properly resealing the battery compartment.
Based on common recommendations and the provided reference, here's the breakdown:
Steps to Address Blink Camera Condensation
Condensation inside a camera lens or housing is typically caused by temperature changes and humidity. When warm, moist air meets a cold surface (like the camera lens or inside the housing), water vapor condenses into liquid.
Here's how to tackle this issue effectively:
1. Bring the Camera Indoors
The crucial first step is to move the camera from the cold, humid outdoor environment to a dry, indoor location.
- Action: Take the camera inside.
- Purpose: Allow the camera to acclimate to a warmer, drier environment.
2. Allow it to Warm Up and Dry Out
Once inside, the condensation needs time to evaporate.
- Action: Let it warm up and dry out for a day.
- Duration: A full 24 hours is recommended to ensure complete drying.
3. Open and Reseal the Battery Compartment
Properly resealing the battery compartment is key to preventing future moisture ingress, especially at the weak point of the battery cover seal.
- Action: Once inside, take the battery cover off.
- Action: Reseal it with a very light coating of plumbers grease on the rubber o-ring.
- Purpose: The grease helps create a better seal, making the camera more resistant to moisture. Use only a thin layer to avoid damaging the rubber.
Summary of the Process
Here is a quick overview of the steps:
| Step | Action | Purpose |
|---|---|---|
| 1. Retrieve Camera | Take camera inside. | Remove from harsh conditions. |
| 2. Dry Indoors | Let it warm up and dry out for a day. | Allow condensation to evaporate. |
| 3. Access Seal | Once inside, take battery cover off. | Prepare for resealing. |
| 4. Reseal | Reseal it with a very light coating of plumbers grease on the rubber o-ring. | Improve moisture resistance of the seal. |
By following these steps, you can effectively remove existing condensation and improve the water resistance of your Blink camera, helping to prevent the issue from recurring. Ensure the camera is completely dry before placing it back outdoors.
