To use a ceramic wash and wax product, you typically mix it with water according to specific ratios depending on whether you are using a foam cannon or washing by hand with a bucket.
Proper application of ceramic wash and wax helps clean your vehicle while leaving behind a protective ceramic layer, enhancing gloss and water beading. The method and mixing ratio are crucial for achieving the best results.
Application Methods & Mixing Ratios
There are two primary methods for using ceramic wash and wax products: using a foam cannon for pre-washing or a contact wash, and traditional bucket washing. Each method requires a specific dilution ratio to ensure effectiveness and efficiency.
Foam Cannon Application
Using a foam cannon creates a thick foam that dwells on the surface, helping to loosen dirt before the contact wash phase.
- Mixing Ratio: When using this ceramic car wash with a foam cannon, we recommend mixing 6:1, 6 parts water to 1 part Hybrid Ceramic Wash & Wax.
- Process:
- Rinse the vehicle to remove loose dirt.
- Fill your foam cannon reservoir with the recommended mixture.
- Apply the foam generously to the entire vehicle.
- Allow the foam to dwell for a few minutes (do not let it dry).
- Proceed with a contact wash using a wash mitt dipped in a separate bucket of wash solution or rinse thoroughly before the contact wash step.
Bucket Washing
The classic method involves using a wash bucket for the primary contact wash.
- Mixing Ratio: When washing in a bucket, mix 2 ounces of Hybrid Ceramic Wash & Wax for every gallon of water used.
- Process:
- Rinse the vehicle to remove loose dirt.
- Prepare your wash bucket with the correct mixture of water and ceramic wash & wax.
- Use a premium wash mitt, dipping it into the solution.
- Wash the vehicle panels, working from top to bottom.
- Rinse the mitt frequently in a separate rinse bucket (if using the two-bucket method) to prevent transferring dirt back to the car.
- Rinse the vehicle thoroughly after washing.
Using Premium Accessories
To achieve a swirl-free finish and maximize the benefits of the ceramic wash and wax, it's important to use high-quality washing tools.
- Always remember to pair with premium accessories to get the best swirl-free results.
- Recommended Accessories:
- High-quality microfiber wash mitts
- Grit guards for your wash and rinse buckets
- Premium microfiber drying towels
Following these guidelines will help you effectively use ceramic wash and wax to clean and protect your vehicle's finish.
Mixing Ratio Summary
For quick reference, here are the recommended mixing ratios:
| Method | Ratio | Example Quantity |
|---|---|---|
| Foam Cannon | 6 parts water to 1 part Wash & Wax | 6 oz water + 1 oz soap |
| Wash Bucket | 2 ounces Wash & Wax per gallon water | 2 oz soap + 1 gallon water |
Remember to always follow the specific instructions on your product's label, as ratios can vary slightly between brands.
