Turning on your car's rain wipers is typically done using a control stock located on the steering column. The exact method can vary slightly depending on your vehicle's make and model, but a common way to engage high-speed wiping involves pushing the stock down.
Engaging Wiper Functions
Based on common controls, manipulating the wiper stock allows you to activate different wiper speeds and functions, such as the windshield washer.
According to the reference provided:
- "And when the stock is pushed all the way down high speed wiping is engaged"
- "to use the windshield washer. Pull back on the stock."
This indicates that for at least the high-speed setting, the action is a simple push downwards. Other positions (upwards clicks or detents) typically control intermittent and low-speed settings, though these are not detailed in the provided reference.
Common Wiper Stock Controls
While the reference specifically details high-speed and washer functions, here's a general breakdown often found on a wiper control stock:
- Off Position: The default or resting position where the wipers are off.
- Intermittent Wiping: Usually one or more clicks upwards from the off position, offering pauses between wipes. Some vehicles have an adjustable ring for the delay interval.
- Low Speed Wiping: A further click upwards provides continuous wiping at a slower speed.
- High Speed Wiping: As mentioned in the reference, often engaged by pushing the stock all the way down or sometimes a final click upwards. This provides continuous wiping at the fastest speed for heavy rain.
- Windshield Washer: Typically activated by pulling the stock towards you. This sprays washer fluid onto the windshield while the wipers perform a few cycles.
How to Turn On High-Speed Wipers (Based on Reference):
| Wiper Function | Action on Stock |
|---|---|
| High Speed Wiping | Push the stock down |
| Windshield Washer | Pull back on the stock |
Note: The reference focuses on high-speed wiping by pushing the stock down. Other speeds (intermittent, low) are commonly activated by moving the stock upwards, but this specific action is not detailed in the provided reference.
To turn on your rain wipers, locate the stock on the side of your steering column (usually the right side) and move it to the desired position. Start with a lower speed or intermittent setting for light rain and move to high speed if visibility is significantly impaired. Remember to return the stock to the 'Off' position when the rain stops.
