To install an anchor point in a car, you typically locate the designated position, remove any covering plug, and install the anchor bolt according to the manufacturer's instructions and torque specifications.
Installing an anchor point in a car, often required for child car seat top tether anchors, involves accessing the specific location designated by the vehicle manufacturer. This process ensures the anchor point is securely fastened to a reinforced part of the vehicle structure, providing a safe attachment for restraints.
Here's a breakdown based on the provided reference:
Steps for Installing an Anchor Bolt
Installing an anchor bolt requires careful attention to location and tightness.
-
Step 1: Locate the Anchorage Point
- Consult your vehicle's owner handbook to find the precise location of the anchorage point. These are usually found behind the rear seating positions, often on the parcel shelf, floor, or roof.
- Importance: The owner's handbook is crucial as it pinpoints the factory-designated and reinforced locations for these anchorages.
-
Step 2: Prepare the Point
- Once located, you will find a thread plug covering the anchorage point.
- Remove this thread plug. It might be a plastic cap or a threaded plug that needs to be unscrewed.
-
Step 3: Install the Anchor Bolt
- Install the anchor bolt into the prepared location.
- Screw the bolt in firmly.
-
Step 4: Tighten the Bolt
- Tighten the anchor bolt to the specified torque.
- Caution: Do not over tighten the anchor bolt. The maximum torque for this installation is 20Nm. Using a torque wrench is recommended to ensure this specification is met.
Why Torque Matters
Tightening the bolt to the correct torque specification (like the 20Nm mentioned) is vital.
- Under-tightening: The anchor point may not be secure, potentially failing in a collision.
- Over-tightening: Can strip the threads in the vehicle's bodywork or damage the bolt, also compromising safety.
Always refer to your specific vehicle's owner's manual and any instructions provided with the anchor bolt or car seat accessory for the most accurate and safe installation method.
