Putting new carpet in your house involves a series of steps to ensure a proper and long-lasting installation. Here's a breakdown of the process, based on the provided reference:
Preparation is Key
1. Remove Old Carpet and Clean the Area
- First, you'll need to remove any existing carpet and padding.
- Make sure the floor underneath is clean and free of debris. This provides a clean base for your new carpet.
2. Remove Doors
- Remove doors to allow space for carpet installation and ensure they won't interfere with the process.
Installing the New Carpet
3. Add Tackless Strips
- Install tackless strips (also known as gripper strips) around the perimeter of the room.
- These strips have small tacks that help hold the carpet in place once stretched.
4. Install the Carpet Padding
- Next, lay out and install the carpet padding over the floor and the installed tackless strips.
- Ensure the padding is properly aligned and covers the entire area.
5. Mark the Corners to Trim
- Before attaching the carpet, mark the corners for trimming. This helps make the carpet fit properly.
6. Get the Glue Ready
- Prepare any necessary carpet glue according to the manufacturer's instructions.
7. Attach the Carpet
- Finally, attach the new carpet, starting from one end and using a knee kicker or carpet stretcher to secure it to the tackless strips.
- Make sure it's smoothly stretched and secured in place.
- Trim any excess carpet from the sides using a carpet knife or utility knife.
By following these steps, you can achieve a successful new carpet installation.
