To remove cross tees, typically found in acoustical ceiling grid systems, you need to disengage their locking mechanism from the main runners.
The process involves manipulating locking tabs and potentially rotating the main runner to release the cross tee connection.
Here are the key steps based on the provided information:
- Locate the Locking Tabs: Identify the locking tabs where the cross tee connects to the main runner. These are the mechanisms holding the two grid components together.
- Push the Tabs: Push the locking tabs on both sides of the cross tee connection point. This action disengages the locking mechanism.
- Rotate the Main Runner: Once the tabs are pushed, now comes the rotation of the main runner. This rotation helps in fully separating the cross tee from the main runner, allowing for its removal.
Important Note for Reinstallation:
The reference also mentions a step related to reinstalling the cross tee: Before reinstalling just bend the locking tab back out at a 45 degree angle. While this is not part of the removal process itself, it highlights a preparation step needed if you plan to reattach the cross tee later.
By following these steps, you can effectively remove cross tees from a ceiling grid system.
