Starting an ECHO chainsaw typically involves preparing the saw and following a specific sequence of steps to engage the engine safely.
Based on the provided reference, here are some key initial steps to start an ECHO chainsaw:
Preparation Steps
Before attempting to start any chainsaw, including an ECHO model, ensure you have read the operator's manual specific to your saw model. Always operate chainsaws with proper safety gear, including hearing protection, eye protection, gloves, and protective footwear.
Starting Procedure (Based on Reference)
To begin the starting process as indicated in the reference:
- Engage the Choke: Pull the choke control knob up all the way. The reference specifically notes "Out," indicating the fully engaged choke position often used for cold starts.
- Secure the Saw: Securely hold down the saw using your hand on the front handle. This provides stability while pulling the starter rope and prevents the saw from jumping or moving unexpectedly.
These steps are crucial initial actions before pulling the starter rope, which would typically follow securing the saw. Ensure the saw is on a stable, flat surface clear of debris.
While the provided reference focuses on these initial steps, a complete starting procedure usually involves several stages, often including pulling the starter rope until the engine "pops," pushing the choke partway in or off, and then pulling again to start the engine. However, the reference explicitly provides only the first two steps.
Following the manufacturer's specific instructions in the operator's manual is always recommended for the most accurate and safe starting procedure for your particular ECHO chainsaw model.
