The referenced YouTube video describes installing window guards that use sticky adhesive strips, similar to command strips, on the back of the guard for mounting. Here's a breakdown based on that video's description (though specifics depend on the type of guard):
-
Prepare the Surface: Ensure the window frame surface where the guards will be installed is clean and dry. This is crucial for proper adhesion. Wipe down the area with a suitable cleaner and allow it to dry completely.
-
Position the Guard: Determine the desired location of the window guard. Window guards should generally be installed to prevent children from falling out of the window while still allowing ventilation and emergency egress for adults. Follow manufacturer's instructions regarding spacing and height.
-
Apply the Adhesive Strips: The video indicates these guards have adhesive strips similar to Command Strips. Peel off the backing of the adhesive strips.
-
Attach the Guard: Carefully align the window guard to the marked position on the window frame. Press firmly on the guard to ensure that the adhesive strips properly adhere to the surface. Apply even pressure to each strip attachment point.
-
Test the Installation: After installation, gently test the stability of the guard to ensure it is securely attached. Allow the adhesive to fully cure according to the manufacturer’s directions, typically a few hours, before relying on the guard's full strength.
Important Considerations:
- Guard Type Matters: The exact installation will vary greatly depending on the type of window guard purchased (e.g., adhesive-mounted, screwed-in, pressure-mounted). Always refer to the manufacturer's installation instructions.
- Safety and Emergency Egress: Ensure the window guards allow for emergency egress for adults in case of a fire. Some window guards have release mechanisms. Familiarize yourself with these.
- Regular Inspection: Routinely inspect window guards to ensure they are securely attached and in good working order.
