The question is ambiguous. Are you asking how to remove dry erase marker or how to remove the board itself from a wall? This answer addresses both scenarios.
Removing Dry Erase Marker
If you're asking how to remove dry erase marker, especially old or stubborn marks, here's how:
- Use a Dry Erase Marker!: Often, simply drawing over the old marks with a fresh dry erase marker and then wiping it clean works surprisingly well. The solvents in the new marker re-liquify the old ink.
- Vinegar and Water Solution: Mix equal parts white vinegar and water. Spray or apply the solution to the board, let it sit for a moment, and then wipe clean with a soft cloth.
- Oxy Clean Paste: Mix Oxy Clean (or a generic equivalent) with water to form a paste. Apply the paste to the affected area, rub in a circular motion with a soft cloth, and rinse with water.
- Rubbing Alcohol (Isopropyl Alcohol): Apply rubbing alcohol to a cloth and gently wipe the board.
- Commercial Cleaners: Many commercially available dry erase board cleaners are effective. Follow the manufacturer's instructions.
Important Considerations:
- Always test any cleaning solution in an inconspicuous area first to ensure it doesn't damage the board's surface.
- Use soft cloths to avoid scratching the board.
- Wipe the board dry after cleaning to prevent streaks.
Removing the Dry Erase Board from a Wall
If you're asking how to remove the entire dry erase board from a wall, the process depends on how it was mounted:
-
Identify the Mounting Method:
- Screws: Look for screws along the edges or corners of the board.
- Adhesive: Check for signs of adhesive strips or glue between the board and the wall.
- Hanging Hardware: The board might be hanging on hooks or brackets.
-
Gather Necessary Tools:
- Screwdriver (if screws are used)
- Putty knife or scraper (for removing adhesive)
- Level
- Stud finder (to locate wall studs for remounting)
- Safety glasses
- Gloves
-
Removal Process:
- Screws: Carefully unscrew all screws holding the board to the wall. Have someone help you hold the board as you remove the last few screws.
- Adhesive: Gently insert a putty knife or scraper between the board and the wall. Work slowly and carefully to avoid damaging the wall. You may need to use a heat gun or hair dryer to soften the adhesive. Once the board is loose, peel it away from the wall.
- Hanging Hardware: Lift the board off the hooks or brackets.
-
Clean Up:
- Remove any remaining adhesive residue from the wall using a solvent like Goo Gone or WD-40. Follow the product instructions carefully.
- Patch any holes in the wall with spackle or drywall compound.
- Sand the patched areas smooth and paint to match the existing wall color.
Safety Precautions:
- Wear safety glasses to protect your eyes from debris.
- Wear gloves to protect your hands.
- Have someone assist you, especially when removing large or heavy boards.
