Using a safety pin to thread a drawstring is a handy trick when the original drawstring has been lost or pulled out. Here's how it's done:
Step-by-Step Guide to Using a Safety Pin for a Drawstring
A safety pin makes threading a drawstring through a garment's casing much easier. Here's a table summarizing the steps:
| Step | Action |
|---|---|
| 1 | Attach a large safety pin to one end of the drawstring. |
| 2 | Poke the safety pin through one hole of the waistband or casing. |
| 3 | Scrunch the drawstring through the casing, using the safety pin as a guide, until you reach the other hole. |
| 4 | Anchor both ends of the drawstring with a large knot to prevent slipping back through. |
| 5 | Remove the safety pin and save it for future use. |
Detailed Explanation
- Attaching the Safety Pin: Begin by opening the safety pin and carefully threading it through the end of your drawstring. Then, close the pin to secure it.
- Entering the Casing: Locate one of the drawstring openings on your clothing item, such as a waistband. Gently guide the safety pin into the opening.
- Threading: Work the drawstring through the casing by pushing and scrunching the fabric with your fingers. The safety pin acts as a guide, making this easier. Continue this process until the safety pin emerges from the other opening.
- Securing the Drawstring: Once threaded through, tie a secure knot at each end of the drawstring. This prevents the ends from slipping back into the casing.
- Removing the Safety Pin: Finally, open and remove the safety pin. The drawstring is now securely in place.
Tips and Tricks
- Use a large safety pin for easier handling.
- If the casing is long or tight, patience is key.
- Consider adding a second knot at each end of the drawstring for extra security.
- Keep the safety pin in a safe place for the next time you need it.
Following these steps, you can easily re-thread your drawstrings, saving both time and frustration.
The reference states: "Attach a large safety pin to one end of the drawstring. Poke the safety pin through one hole and scrunch the drawstring through the waistband until you get to the other hole. Anchor either end of the drawstring with a large knot so it won't slip through again. Remove the safety pin and save it for the next emergency."
