The recommended mix for cement pavers is 1 part AfriSam All Purpose Cement, 2½ parts coarse sand, and 2½ parts stone.
Detailed Cement Paver Mix Information
This mix ratio creates a medium-strength concrete suitable for paving applications. Here's a breakdown of the materials needed per cubic meter, along with an allowance for waste:
| Material | Quantity per cubic meter | Quantity with 10% wastage |
|---|---|---|
| AfriSam All Purpose Cement | 7.7 bags | 8.47 bags |
| Coarse Sand | 0.63 cubic meters | 0.693 cubic meters |
| Stone | 0.63 cubic meters | 0.693 cubic meters |
Key Points
- Consistency is Key: Ensuring a uniform mix is important for the strength and durability of the pavers.
- Accurate Measurement: Use accurate measuring tools to maintain the correct proportions.
- Mixing: Mix the dry ingredients thoroughly before adding water. Add water gradually until the desired consistency is reached.
- Wastage: Always allow for wastage during mixing and placement. The recommendation is an additional 10% of the required material quantities.
Practical Advice
- Use a concrete mixer for larger batches of concrete pavers. This will ensure the mix is uniform and well blended.
- If mixing by hand, use a clean, flat surface and mix the dry ingredients thoroughly before adding water.
- Avoid adding too much water, as this will weaken the concrete mix.
- Pour the concrete into your desired paver molds or forms. Ensure that the forms are well oiled before you pour concrete.
- Allow the pavers to cure properly before placing them. The curing time may vary according to weather conditions. Refer to the manufacturer’s guidelines for recommendations on curing.
This combination is designed to provide a durable and strong paver suitable for many applications. Ensure you follow the ratios closely to achieve the desired result.
