askvity

How to Open the Filter on an Electrolux Dishwasher: Cleaning Steps

Published in Dishwasher Filter Maintenance 3 mins read

Maintaining the filter in your Electrolux dishwasher is crucial for optimal performance and preventing clogs. While the term "opening" the filter might refer to accessing and removing the filter assembly from the dishwasher tub, the provided information focuses on the essential steps for cleaning and handling the filter components once they are accessible.

Here's a guide based on the cleaning process described:

Steps for Cleaning and Replacing Your Dishwasher Filter

Once you have accessed the filter assembly at the bottom of your dishwasher tub (the specific method for removing the filter varies by model; consult your user manual), you can proceed with cleaning it using these steps:

  1. Flush the Filter: Thoroughly clean the filter by holding it under running water. As the reference states, you should "Top bottom flush the filter by holding it under running water". This helps remove trapped food particles and debris from all parts of the filter mesh and components.
  2. Handle and Replace Components: The filter assembly often consists of multiple parts, such as a coarse filter and a fine filter. The reference mentions to "replace before replacing the fine filter". This step suggests an order for reassembling or replacing the cleaned filter components – perhaps securing the main filter part or assembly before dealing with the fine filter component. Ensure all parts are clean before reassembly.
  3. Replace the Filter Assembly: Once cleaned and reassembled (if applicable), carefully place the filter assembly back into its position at the bottom of the dishwasher tub. Ensure it is correctly seated and locked in place according to your model's specifications.

Final Cleaning Step

After you have cleaned and replaced the filter, it's recommended to perform an additional cleaning action:

  • Run an Empty Cycle: As the reference suggests, "lastly try giving the washer a thorough cleaning by running an empty cycle." Running an empty cycle on a hot wash setting can help rinse away any remaining debris in the system and keep the dishwasher fresh.

For precise instructions on how to remove the filter assembly from your specific Electrolux dishwasher model (the initial "opening" or access step), always refer to your appliance's user manual.

Related Articles