How do you fit the keeper plate of a door holder?
Fitting the keeper plate, a key component of a door holder, involves selecting the correct position on the door and securing it properly.
To correctly install the keeper plate part of a door holder, specific steps should be followed to ensure proper function and engagement with the main holder mechanism. The location on the door is crucial for effective operation.
Step-by-Step Installation
Here is a straightforward guide to fitting the keeper plate:
| Step | Action | Key Detail |
|---|---|---|
| 1 | Decide where the door holder will be mounted. | This position should be located at least 650 mm from the door hinge. For doors with overhead closers, a higher position is often best. |
| 2 | Mark the position for the keeper plate on the door. | Use your chosen mounting point to accurately mark where the plate will be screwed. |
| 3 | Check the rubber ring is fitted. | Before attaching, ensure the essential rubber ring is in place on the keeper plate. |
| 4 | Screw the keeper plate to the door. | Securely fasten the keeper plate to the door using appropriate screws and tools. |
Important Considerations
- Positioning: As the reference highlights, placing the keeper plate at least 650 mm from the door hinge is a fundamental requirement for most door holders. This distance helps the holder engage effectively. For doors fitted with overhead closers, positioning the keeper plate towards the top of the door is generally recommended for better performance.
- Pre-Installation Check: Always take a moment to check the rubber ring is fitted onto the keeper plate before you screw it onto the door. This small ring is vital for the holder's smooth operation and longevity.
By following these steps, you can accurately and securely fit the keeper plate component of your door holder to the door.
