Installing a door aligner is a straightforward process that can help your doors close properly. Here's how to do it:
-
Locate the Correct Position: From inside the closet, identify the back of the door where the aligner will be placed.
-
Loosely Attach the Aligner: Position the aligner about 12 inches from the floor on the back of the door. Use screws to loosely attach it. Do not fully tighten the screws at this stage.
-
Adjust the Aligner: Adjust the aligner either in or out until the door snaps closed smoothly.
-
Secure the Aligner: Once you are satisfied with the door's closure, tighten the screws completely.
| Step | Action |
|---|---|
| 1. Position | Locate the back of the door inside the closet, about 12 inches from the floor. |
| 2. Loose Attachment | Attach the aligner loosely using screws, do not tighten completely. |
| 3. Adjust | Move the aligner in or out until the door closes properly. |
| 4. Secure | Once the door closes correctly, tighten the screws fully to secure the door aligner. |
Additional Tips:
- Make sure to use the appropriate screws for your door and aligner.
- If the door is still not closing correctly, recheck the position of the aligner and readjust as needed.
- Test the door several times to ensure a secure and consistent closure.
- For bi-fold doors, aligners may be necessary on both top and bottom areas of the door.
- If problems persist, consider consulting with a professional.
By following these steps, you can easily install a door aligner and ensure your doors close properly. This method is based on information that says aligners should be loosely attached about 12 inches from the floor and adjusted so that doors snap closed.
