Installing a door hinge stopper is a simple process that can prevent damage to your walls and door. Here's how to do it, based on the information provided in the reference:
Steps for Installing a Hinge Pin Door Stop
This method involves replacing one of the existing hinge pins with the hinge pin door stop. Here’s a step-by-step guide:
-
Prepare the Hinge: First, you'll need to remove one of the hinge pins from your door hinge.
- You can use a flathead screwdriver by gently wedging it underneath the pin and prying it upwards.
- Alternatively, you can use a punch from below the hinge to tap the pin upwards with a hammer.
-
Replace with Hinge Pin Door Stop: Once the original hinge pin is removed, insert the door hinge stopper in its place.
- The hinge pin door stop will fit into the same slot, typically without requiring any tools.
- It is important to select the correct size hinge pin door stop that fits the original pin diameter correctly.
-
Test the Door Stop: Open and close the door to ensure the hinge pin door stop is working correctly and preventing the door from hitting the wall.
- Adjust if necessary to ensure the door stops at the desired point.
Summary of Installation Steps
| Step | Tool Needed | Action |
|---|---|---|
| 1. Remove Hinge Pin | Flathead screwdriver or Punch & Hammer | Wedge under or tap out the pin |
| 2. Insert Hinge Pin Door Stop | None | Replace the original pin with the door stop |
| 3. Test and Adjust | None | Check the door stopping functionality and adjust the pin door stop as needed. |
By following these straightforward steps, you can easily install a door hinge stopper and protect your walls and door.
