Using the Schlage BE365 keypad deadbolt involves operating it from both the exterior keypad and the interior thumbturn.
The Schlage BE365 keypad deadbolt offers convenient keyless entry using a user code. Here's how to use it effectively.
Unlocking from the Outside
To unlock your Schlage BE365 from the exterior using a code:
- Illuminate the Keypad: Touch the large Schlage button at the top of the keypad. This will light up the numbered buttons, making them visible in low light.
- Enter Your Code: Once the keypad is illuminated, simply enter a valid four-digit user code.
- Confirm Unlocking: After entering a valid code, the Schlage button will turn green. You can then turn the thumbturn (or sometimes the exterior knob/lever if part of a set) to retract the deadbolt and open the door.
Reference Information: Based on the provided video snippet, you can illuminate the keypad by touching the Schlage button. To operate your BE365 keypad deadbolt from outside, simply enter a valid four-digit user code after touching the Schlage button to illuminate the keypad. The Schlage button will turn green upon successful code entry.
Locking from the Outside
To lock the Schlage BE365 from the exterior after leaving:
- Typically, you close the door and then simply press the Schlage button. The deadbolt should extend automatically after a moment, usually accompanied by a red light flash or beep.
- Alternatively, some users re-enter their valid user code to lock the deadbolt.
Operating from the Inside
From the inside of the door, using the Schlage BE365 is straightforward:
- Locking/Unlocking: Use the thumbturn located on the interior side of the deadbolt. Turning the thumbturn manually extends or retracts the deadbolt, securing or unsecuring the door.
Understanding these simple steps allows you to easily control access with your Schlage BE365 keypad deadbolt.
