How Do I Adjust My French Doors?

To adjust your French doors, you'll need to focus on the corner bearings located at the lower hinge. Here’s how to do it:

Understanding French Door Adjustment

French doors, like any door, can sometimes sag or become misaligned. This leads to issues like sticking, difficulty closing, or drafts. Adjusting them involves tweaking the hinges using specific screws.

Steps to Adjust French Doors

Here’s a step-by-step guide based on the provided reference:

1. Measure the Gap: Use a tape measure or yard stick to check the distance between the French door leaf (the moving part of the door) and the door frame. This will help you identify which part needs adjustment.
2. Locate Corner Bearings: Find the plastic covers on the corner bearings, which are located at the lower hinge of your doors.
3. Remove Covers: Take off the plastic covers to expose the corner bearing adjusting screw.
4. Adjust the Screw:
   • Lifting the Door Leaf: To lift the door leaf, turn the corner bearing adjusting screw clockwise.
   • Lowering the Door Leaf: To lower the door leaf, turn the corner bearing adjusting screw anticlockwise.
   • Use small adjustments and keep checking the door alignment, until it fits properly.

Diagram Explanation

The reference mentions "(Fig." which may refer to a diagram or drawing indicating the location of the corner bearing and adjusting screw. This would help users visualize where the components are and how the adjustment process happens. It would visually complement the instructions written above.

Summary

Step	Action
1. Measure the Gap	Determine misaligned areas using a tape measure.
2. Locate Corner Bearings	Find the bearings at the lower hinge and remove the plastic covers.
3. Adjust Screw	Turn clockwise to lift, or anticlockwise to lower, door leaf.
4. Test Alignment	Check door alignment frequently during adjustment.

By following these steps, you can effectively adjust your French doors and ensure they operate smoothly.