You can raise a uPVC door by adjusting the hinges using an Allen key.
Here's a breakdown of how to do it:
- Identify the Adjustment Point: Locate the bottom section of the door hinge. This is where you will find the adjustment mechanism.
- Insert the Allen Key: Insert the Allen key into the hole located at the bottom of the hinge.
- Turn the Allen Key: Rotate the Allen key. Turning it in one direction will lift the door, while turning it in the opposite direction will lower it. As you turn the key, you should visibly see the door moving up or down.
- Test the Door: After making an adjustment, open and close the door to see if the issue is resolved. You may need to make multiple small adjustments to achieve the desired height.
- Repeat for Other Hinges: If necessary, repeat this process for the other hinges on the door to ensure the door is evenly aligned.
By following these steps, you should be able to raise your uPVC door and correct any alignment issues.
