Installing a front door stopper is a simple task that helps protect your walls or trim from damage. Based on the specific type described in the reference, the installation involves a disc and the stopper itself, typically mounted on the trim.
Step-by-Step Installation Guide
This guide explains how to install a specific type of door stopper using a screw and disc system, often attached to the door trim.
Getting Started
You'll need the door stopper kit, which includes a disc and the door stop itself, and a screw. You'll also likely need a screwdriver or drill.
The Installation Process
The process involves attaching the disc to the trim and then securing the door stopper to the disc.
Here are the steps based on the provided reference:
- Prepare the Disc: Take the screw provided with the door stopper.
- Attach the Disc: Put the screw through the disc and screw it firmly into your trim at the desired location where the door should stop. Ensure it is secure.
- Insert the Stopper: The pointy end of the door stop fits into the hole in the top of the disc you just installed.
- Secure the Stopper: To install the door stop into the disc, you need to reverse the process used to take it out. If taking it out requires turning clockwise, then to install it again, turn the door stop counterclockwise until it is secure in the hole.
Summary of Components and Actions
Below is a simple table summarizing the key components and their roles in the installation:
| Component | Action | Attached To |
|---|---|---|
| Screw | Goes through the disc | - |
| Disc | Attached to the trim using the screw | Trim |
| Door Stop | Pointy end fits into the hole in the disc | Disc |
Remember to turn the door stop counterclockwise into the disc to secure it, effectively reversing the removal action.
By following these steps, you can effectively install this style of front door stopper to protect your property.
