Fitting flat pack drawer runners is a straightforward process. The main step involves placing the drawer onto the top of the installed runners. Here's a simple breakdown:
Installing Drawer Runners
While the specific installation process for the runners themselves may vary slightly depending on the type of runner and flat pack furniture, the core idea remains consistent.
-
Identify the Runner Type:
- Determine if you have side-mounted, under-mounted, or center-mounted runners, as this affects the installation.
-
Prepare the Drawer and Cabinet:
- Ensure that the drawer and the inside of the cabinet are clean and free of any debris.
- If necessary, identify and pre-drill screw holes according to the manufacturer's instructions.
-
Attach the Runners:
- Typically, you'll attach the drawer runners to the inside walls of the cabinet.
- Then attach the other parts of the runners to the sides of the drawer (or bottom, depending on the design)
Fitting the Drawer
Once your drawer runners are attached to the cabinet and the drawer itself, you can fit the drawer:
-
Position the Drawer:
- Carefully align the drawer with the runners installed within the cabinet.
-
Engage the Runners:
- According to the video "goFlatpacks - How to Install Drawer Runners - YouTube", "Simply place the drawer on the top of the runners".
- Gently push the drawer in so that the runners engage. The runners should slide smoothly.
-
Test:
- Open and close the drawer several times to ensure smooth operation. Adjust as needed.
Troubleshooting
- Binding: If the drawer binds or sticks, ensure that the runners are properly aligned and that all screws are securely tightened.
- Unevenness: Make sure the runners are installed at the same level in the cabinet.
