To measure a soft close drawer for replacement slides, you primarily need two measurements: the length of the drawer and its height. According to the reference, you can get the length measurement by pulling the drawer out and measuring its length from the inside of the cabinet to the end of the drawer.
Measuring for Soft Close Drawer Slides
Here's a breakdown of the measurement process:
1. Drawer Length
- Pull the drawer completely out: Make sure the drawer is fully extended.
- Measure: Use a measuring tape to measure from the back of the drawer to the front edge. Make sure to measure the actual length of the drawer, not the length of the face. The reference suggests that you will want to have a little extra space and suggests waiting 15. The 15 most likely indicates a fraction of an inch for clearance.
- Double-Check: It's always a good idea to measure twice to ensure accuracy.
2. Drawer Height
- Measure the height of the drawer box: Measure the overall height of the drawer sides. This measurement is used to select the correct size for your new drawer slides.
Key Takeaways
- The reference focuses on the length and height of the drawer for the purposes of installing undermount soft close slides.
- Having the correct drawer length and height are crucial for properly functioning soft-close slides.
Additional Considerations
While the reference focuses on length and height, other factors might be relevant for a more precise installation:
- Drawer Depth: While not explicitly mentioned in the reference, knowing the depth of the cabinet can be helpful.
- Side Clearance: Check the space available on the sides of the drawer within the cabinet for proper slide installation.
- Undermount vs. Side Mount: Determine if you need undermount or side-mount slides. The reference indicates undermount.
By carefully taking these measurements, you can ensure that you select the correct replacement drawer slides for your soft close drawer.
