To measure for pull-out drawers, you need to accurately measure the opening where the drawer will be installed.
Measuring Process
Here's a step-by-step guide on how to measure for pull-out drawers:
-
Determine the Opening:
- Use a measuring tape.
- Place the end of the tape at one edge of the opening.
- Extend the tape to the opposite edge.
- Ensure the tape is straight and taut.
-
Read the Measurement:
- Take the measurement directly from the tape. For example, the reference states that if the measurement from edge to edge is 18 inches, then you order an 18-inch pull out tray.
- This measurement represents the width of the opening, and that determines the size of the pull-out tray you should order.
-
Verify Depth:
- In addition to the width, consider the depth of your cabinet.
- Measure from the front of the cabinet opening to the back wall.
- Ensure the pull-out drawer you choose will fit within this depth. This will ensure that the drawer will fully slide in and out.
Key Considerations
- Inside Dimensions: Pull-out drawer measurements typically refer to the cabinet opening rather than the actual drawer dimensions.
- Slight Differences: Be aware that there may be some minor differences between the opening measurement and the physical dimensions of the drawer unit to allow for the drawer mechanism to properly function within the opening.
Example
| Measurement | Action |
|---|---|
| 18 inches | Order an 18-inch pull-out drawer |
In summary, when measuring for pull-out drawers, use a measuring tape to measure the width of the opening and order a pull-out drawer to match. The reference highlights that if your opening is 18 inches wide, then you should order an 18 inch pull-out tray. Also make sure to consider the depth of the cabinet to ensure your chosen pull-out drawer fits.
