Redoing drawer slides involves several key steps to ensure smooth operation. Here's a breakdown of the process using information from the provided reference:
Replacing Drawer Slides: A Step-by-Step Guide
This process involves removing the old slides and installing new ones, ensuring proper alignment and smooth drawer movement.
1. Remove Existing Slides
- The first step is to carefully remove the old, existing drawer slides from both the cabinet and the drawer box. This might require unscrewing them or disengaging any clips.
- Reference: 1. Remove Existing Slides. Photo: FotoDuets / iStock / Getty Images Plus / Getty Images. This step sets the stage for a clean installation of new slides.
2. Prepare the New Slides
- Get the new slides ready for installation. This might involve separating the cabinet slide from the drawer slide if they come as separate parts.
- Reference: 2. Prepare the New Slides. Photo: branislav / Adobe Stock. This ensures you have all parts ready for installation.
3. Measure and Mark
- Accurately measure and mark the positions where the new slides will be installed, both inside the cabinet and on the drawer box. This step is crucial for correct alignment.
- Precise marking ensures that the drawer will slide in and out smoothly without binding.
4. Install Slides Into the Cabinet
- Securely attach the cabinet slides to the inside of the cabinet, using screws. Ensure they are positioned properly according to your marks and are level.
- Make sure that the slides are securely fixed into the correct position for smooth operation.
5. Attach the Slides to the Drawer Box
- Install the corresponding drawer slides to the sides of the drawer box. Again, make sure they are properly aligned with the cabinet slides.
- Proper alignment here ensures the drawer and cabinet slides match up properly.
6. Insert the Drawer
- Finally, carefully slide the drawer into the cabinet. Test to see if it slides smoothly.
- This completes the process of redoing your drawer slides.
Summary Table
| Step | Description |
|---|---|
| 1. Remove Old Slides | Take out the old slides from the cabinet and drawer. |
| 2. Prepare New Slides | Get the new slides ready for installation. |
| 3. Measure & Mark | Measure and mark where the new slides will be positioned. |
| 4. Install Cab Slides | Attach the slides to the inside of the cabinet. |
| 5. Attach Drawer Slides | Attach the slides to the sides of the drawer box. |
| 6. Insert Drawer | Insert the drawer back into the cabinet and test its movement. |
By following these steps, you can successfully replace your drawer slides.
