Removing an Accuride drawer typically involves disengaging the drawer slide mechanism, which varies depending on the specific Accuride slide model.
Accuride drawer slides utilize different types of disconnect mechanisms to allow for easy drawer removal. Understanding the specific mechanism on your slide is crucial for proper removal. Based on the reference provided, key disconnect types include:
Common Accuride Disconnect Methods
- Push Latch Disconnect Button: Some Accuride models, such as the Accuride model 3732, use a push latch disconnect button. This method involves locating a button or latch on the slide (often near the front when the drawer is extended) and pushing it to release the drawer member from the rest of the slide. You usually need to push a button on each slide simultaneously while pulling the drawer straight out.
- Rail Method Disconnect: The reference also mentions a "rail method of disconnect," noting there are two variations. This often involves manipulating a lever or tab integrated into the slide rail itself. These levers typically need to be engaged (e.g., one pushed down, one pulled up, or both pushed in) simultaneously on both slides while the drawer is pulled free.
General Steps for Removing an Accuride Drawer
While the exact method depends on the slide model, here is a general process:
- Extend the Drawer: Pull the drawer out fully until it stops.
- Locate the Disconnect: Look for a lever, button, or tab on each slide mechanism, typically located where the inner slide (attached to the drawer) meets the intermediate slide (attached to the cabinet).
- Engage the Disconnects:
- Levers/Tabs: Many slides use levers or tabs that you push up, pull down, or squeeze. Note that the action required may be different on the left and right slides (e.g., push the left lever down and the right lever up).
- Buttons: Some models have a distinct button to push (as seen with the Accuride 3732's push latch button).
- Pull the Drawer Out: While holding the disconnects engaged on both sides, gently pull the drawer straight forward and out of the cabinet.
Always refer to the specific model number of your Accuride slide if possible, as manufacturers often provide detailed instructions or diagrams for each product line.
