To connect your Huion Kamvas 13 to your monitor using the standard 3-in-1 cable, you will need to connect the single USB-C end to the tablet and the three other ends (HDMI and two USB-A) to your computer or monitor.
Connecting your Huion Kamvas 13 graphic display to your computer setup, including extending to a monitor, is primarily done using the included cables. The most common method involves the 3-in-1 cable, which simplifies the process by combining power, data, and video signals into one connection for the tablet end.
Using the Standard 3-in-1 Cable
The standard connection method for the Kamvas 13 utilizes a 3-in-1 cable. This cable has a single connector that plugs into the tablet and branches out into three separate connectors for your computer.
Here's a breakdown of the connections:
-
Connect to the Tablet:
- Take the single-piece end of the 3-in-1 cable.
- Connect it to the USB-C port on the right-hand side of your Huion Kamvas 13 (when looking at the tablet face-up).
-
Connect to Your Computer/Monitor:
- The other end of the 3-in-1 cable splits into three connectors:
- HDMI Connector: This carries the video signal from your computer to the Kamvas 13, allowing it to function as a display. Connect this end to an available HDMI port on your computer or monitor.
- Black USB-A Connector: This is the primary USB data and power connection. Connect this to a standard USB-A port on your computer.
- Red USB-A Connector: This connector is for additional power if the black USB-A port doesn't provide enough power (e.g., low-power laptop ports). If the tablet doesn't power on or is unstable with just the black USB-A, connect this red one as well. It's often connected to another USB-A port on your computer or a USB wall adapter (at least 5V, 2A recommended).
- The other end of the 3-in-1 cable splits into three connectors:
Summary of Connections:
| Cable End | Connects To | Purpose | Notes |
|---|---|---|---|
| Single USB-C | Huion Kamvas 13 (Right Port) | All-in-one connector | Tablet side connection |
| HDMI | Computer / Monitor | Video signal | Provides the display feed |
| Black USB-A | Computer | Data & Power | Essential for function & basic power |
| Red USB-A | Computer / Power Adapter | Additional Power | Use if tablet needs more power |
Setting Up Your Display
Once the physical connections are made, you will need to configure your computer's display settings to recognize the Kamvas 13.
- Windows: Right-click on your desktop, select "Display settings." You should see representations of your connected displays, including your primary monitor and the Kamvas 13. You can arrange them and choose between "Duplicate these displays," "Extend these displays," or "Show only on 1/2." For typical drawing use while referencing a main monitor, "Extend these displays" is often preferred.
- macOS: Go to "System Preferences" > "Displays." The Kamvas 13 should appear alongside your built-in or external monitor. Use the "Arrangement" tab to position the displays and the "Display" tab for resolution and mirroring/extending options.
Ensure you have the correct Huion drivers installed for full functionality, including pen pressure and customizable buttons. The drivers allow your computer to communicate properly with the tablet.
Connecting your Kamvas 13 effectively turns it into a second (or third) monitor that you can draw directly on, seamlessly integrating it into your digital workflow.
