Changing a drill brush involves a straightforward process of removing the old one and installing a new one. Here's a step-by-step guide based on the reference provided:
Steps to Change a Drill Brush
Here is a breakdown of the process for changing a drill brush.
-
Remove the Battery & Open the Housing: Always start by removing the battery from your cordless drill to ensure safety. This prevents accidental activation. Next, you'll need to open the drill's housing to access the brushes.
-
Unclip the Brushes: Once the housing is open, you will find the brushes secured by clips. Unclip or release the brushes from their holders.
-
Remove and Replace the Brushes: Carefully take out the old, worn brushes. Insert the new brushes into the same location, making sure they are correctly positioned.
-
Refit the Housing: Close the drill's housing, securing it back into place.
-
Get Back to Work!: Now, your drill is ready for use again with its fresh brushes.
Detailed Steps
| Step | Action | Notes |
|---|---|---|
| 1 | Remove the battery from the cordless drill. | This is a crucial safety step to prevent accidental starts. |
| 2 | Open the drill's housing. | This may involve screws or clips depending on the drill model. |
| 3 | Unclip/release the old brush. | Be gentle to avoid damaging any components. |
| 4 | Remove the worn brush. | Note how the old brush is oriented to properly install the new one. |
| 5 | Install the new brush. | Make sure it is seated firmly in the holder. |
| 6 | Repeat steps 3-5 for the other brush, if needed. | If the drill uses two brushes. |
| 7 | Close the drill's housing. | Ensure all components are properly aligned before fully securing the housing. |
| 8 | Reinsert the battery. | Your drill is now ready for operation. |
By following these steps you can effectively change the drill brush on your drill.
