Pressing Direct to Film (DTF) transfers is a straightforward process primarily involving correct placement and heat application according to specific time and temperature settings.
To press DTF transfers, place the transfer print-side down onto your garment, ensuring the ink is touching the fabric. Press it with a heat press for 7-10 seconds at 300˚F, then perform a hot peel.
Here's a more detailed breakdown of the process:
Step-by-Step DTF Transfer Pressing
Follow these steps for successful application of your DTF transfers:
- Prepare Your Garment: Ensure your garment is smooth and free of wrinkles. You may pre-press it briefly to remove moisture, though this step isn't always strictly necessary depending on the fabric.
- Position the Transfer: Carefully place the DTF transfer onto the garment. The print-side must be facing down so the ink directly contacts the fabric. The clear film carrier makes it easy to see exactly where you are placing the design. Double-check that the transfer is oriented correctly and not upside down!
- Apply Heat: Close your heat press. According to the reference, you should press the transfer for 7-10 seconds.
- Set Temperature: The specified temperature for pressing is 300˚F. Ensure your heat press is calibrated to this temperature.
- Peel the Film: Our DTF transfers are designed for a hot peel. Immediately after opening the press (while the transfer is still hot), carefully and smoothly peel away the clear film carrier. The design should remain perfectly adhered to the garment.
Key Pressing Parameters
Here’s a quick reference for the essential settings:
| Setting | Value | Notes |
|---|---|---|
| Placement | Print-side down | Ink touching the garment |
| Press Time | 7-10 seconds | |
| Temperature | 300˚F | Ensure press is calibrated |
| Peel Type | Hot Peel | Peel immediately after pressing |
Following these simple steps ensures a durable and vibrant application of your DTF transfer onto your chosen garment.
