Removing engine coolant, often necessary for maintenance like flushing or replacing components, involves carefully draining the old fluid from the cooling system. According to the provided reference, the initial steps focus on draining the radiator.
Here's how you remove engine coolant, based on the reference:
Steps for Draining Coolant
The process begins by accessing the vehicle's radiator to locate the drain point.
- Locate the Drain Plug: Find the drain plug on the radiator. This plug is typically situated on the left or right side of the radiator, specifically at the bottom.
- Position Catch Pan: Place a suitable catch pan underneath the radiator to collect the draining coolant.
- Loosen and Drain: Loosen the drain plug to allow the old coolant to begin draining from the radiator into the catch pan.
- Allow Drainage: Let the coolant drain completely from the radiator.
- Reposition Catch Pan: Once the radiator has drained, move your catch pan underneath the engine.
Note: The reference focuses on draining the radiator. A complete coolant removal process often involves draining the engine block as well, depending on the vehicle model, though this specific action isn't detailed in the provided text.
Always remember that used coolant is toxic and must be collected and disposed of properly according to local regulations. Never pour it down drains or onto the ground.
