How to Take Engine Oil?

The question "How to take engine oil?" is ambiguous and can be interpreted in multiple ways. Based on the provided reference, which is a video titled "How to change your Engine Oil," the most relevant interpretation is how to remove engine oil from an engine during an oil change. Here's how to do it:

Draining Engine Oil

The primary method of "taking" engine oil is draining it from the engine. This is typically done when performing a routine oil change. Here's the process, incorporating information from the YouTube reference:

Steps for Draining Engine Oil:

1. Locate the Drain Plug: Find the oil drain plug underneath your vehicle’s engine. It is usually a bolt at the bottom of the oil pan.
2. Position the Drain Pan: Place a suitable drain pan underneath the drain plug. Ensure the pan is large enough to hold all the old oil.
3. Loosen the Drain Plug: Using a wrench of the correct size, carefully loosen the drain plug. Once it's loosened, you can use your hand to unscrew the rest of the way. Be ready to quickly remove the plug and let the oil drain into the pan.
4. Let the Oil Drain Completely: Allow all the old oil to drain into the pan. This might take several minutes.
5. Reinstall the Drain Plug: Once the oil has completely drained, clean the drain plug and reinstall it, tightening it to the manufacturer’s specified torque. Do not overtighten.

Important Considerations:

• Safety: Always wear gloves and eye protection to avoid contact with hot oil. Ensure that your vehicle is secure.

Removing the Oil Filter

In addition to draining the oil, removing the oil filter is a crucial part of an oil change. The reference discusses this process:

1. Locate the Oil Filter: Find the oil filter on your engine.
2. Use a Filter Removal Tool: As the video suggests (1:47), oil filters are often too tight to remove by hand. A filter removal tool is necessary to loosen the filter by turning it anticlockwise (1:47).
3. Remove the Old Filter: Unscrew the old filter and allow any remaining oil to drain into the pan.
4. Install New Filter: Lightly lubricate the rubber gasket of your new filter with a small amount of new engine oil. Then, screw it on by hand until it is snug. Follow any specific instructions provided for your vehicle regarding filter tightening.

Summary

Taking engine oil, in the context of an oil change, involves both draining the old oil from the oil pan and removing the old oil filter. This process is a standard maintenance task for vehicles.