Based on the provided information, using Coral Epoxy involves a specific two-coat application process with required drying times and height specifications before subsequent layers can be applied.
Applying Coral Epoxy involves a multi-step process focused on layering and proper curing times to ensure effectiveness and durability.
Step-by-Step Coral Epoxy Application
Follow these steps precisely for applying the Coral Epoxy as described:
- Apply the First Coat of Epoxy: Begin by applying the initial layer of the epoxy product to the desired surface. Ensure thorough coverage.
- Wait 24 Hours: Allow the first coat to cure for a full 24 hours before proceeding.
- Apply a Second Coat: After the initial curing period, apply a second, reinforcing coat of the epoxy.
- Ensure Adequate Height: The application of the epoxy (both coats combined) must reach a minimum height of 120 cm above ground level. This is a critical requirement.
- Wait 48 Hours: Following the application of the second coat, allow a longer curing period of 48 hours.
- Apply Next Layer: After the 48-hour waiting period, you can then proceed to apply Acrylic Putty or the final finishing paint.
Key Application Timeline
Here is a summary of the critical steps and waiting times:
| Step | Action | Minimum Height Requirement | Waiting Period Before Next Step |
|---|---|---|---|
| 1st Coat | Apply Epoxy | Start Application | 24 Hours |
| 2nd Coat | Apply Second Layer of Epoxy | Reach >= 120 cm total | 48 Hours |
| Subsequent Application | Apply Acrylic Putty or Finishing Paint | N/A | N/A |
- Note: Adhering strictly to the waiting periods and height requirement is essential for optimal results.
