Angling a fence properly is crucial for navigating property lines, obstacles, or simply changing the direction of your fence run. Based on common fencing practices and the provided references, there are specific methods and post types designed for different angles.
Methods for Angling a Fence
Successfully changing the direction of your fence depends on the severity of the angle you need to create. Here are several techniques, utilizing different fence posts or hardware, as outlined in the references:
1. Using a Corner Post for Angles Less Than 90 Degrees
For turns that are tighter than a standard 90-degree corner, the first method is to utilize a Corner Post. The reference specifically states: "Use a Corner Post For Angles Less Than 90 Degrees." While typically designed for 90-degree turns, corner posts can often accommodate slightly tighter angles, possibly requiring adjustments during installation depending on the fence panel system used.
2. Using a Line Post for Angles Greater Than 90 Degrees
When you need to create an angle that is wider than 90 degrees (an obtuse angle), you should use a Line Post. The reference indicates: "Use a Line Post For Angles Greater Than 90 Degrees." Line posts are typically used for straight sections of fence, having connections on opposite sides. For angles greater than 90 degrees, the panels pivot slightly on the line post, allowing the fence line to gently change direction.
3. Using an End Post with Adjustable Wall Mount Brackets
Sometimes, you may need to angle a fence panel where it meets a wall, existing structure, or another non-standard connection point. In such cases, the reference suggests: "Use an End Post Along With Adjustable Wall Mount Brackets." An end post terminates a fence run, usually having connections on only one side. Attaching adjustable wall mount brackets to this post and the structure allows for flexibility in positioning and angling the final panel section.
4. Purchasing a Blank Post and Routing Holes In The Field
For maximum flexibility in creating custom or unusual angles, the reference provides another method: "Purchase a Blank Post and Route Holes In The Field." A blank post has no pre-drilled or pre-routed holes for attaching fence panels. This allows you to measure the exact angle needed on-site and then use a routing tool to create the necessary attachment points directly on the post in the required positions. This method is ideal for angles that standard posts cannot accommodate.
Summary Table of Methods
| Method | Post Type(s) | Typical Angle Use | Notes |
|---|---|---|---|
| Use standard post design for angle | Corner Post | Angles Less Than 90 Degrees | As per Reference 1 |
| Use standard post design for angle | Line Post | Angles Greater Than 90 Degrees | As per Reference 2 |
| Connect to a structure with flexibility | End Post + Adjustable Brackets | Varied (often terminating) | As per Reference 3 |
| Create custom attachment points on-site | Blank Post | Any Angle | Requires routing tools; As per Reference 4 |
By selecting the appropriate post type or hardware based on the required angle and connection point, you can effectively navigate changes in direction when installing your fence.
