askvity

Understanding the Setup

Published in Fiber Internet Setup 3 mins read

How Do I Connect My Fibre Router?

Connecting your fiber router involves a few key steps, depending on your setup. Fiber internet doesn't directly connect to your router like a standard Ethernet cable. Instead, it uses an Optical Network Terminal (ONT).

Your internet service provider (ISP) provides the fiber optic cable that terminates at an ONT, a device that converts the optical signal to an electrical signal. This ONT usually has one or more Ethernet ports. Your home router then connects to the ONT via an Ethernet cable.

Step-by-Step Connection Guide

  1. Locate your ONT: This is often a small box provided by your ISP, usually near where the fiber optic cable enters your home.

  2. Connect the fiber optic cable: Your ISP's technician will typically handle this, connecting the fiber cable from the outside to the ONT.

  3. Connect the ONT to your router: Use an Ethernet cable to connect one of the Ethernet ports on the ONT to the WAN (Wide Area Network) port on your router. This is crucial; do not connect it to a LAN (Local Area Network) port.

  4. Power on your devices: Ensure both your ONT and router are powered on. Your router may take a few minutes to establish a connection.

  5. Configure your router (if necessary): Depending on your router and ISP, you might need to configure the router's WAN settings. This may involve setting the connection type (e.g., DHCP, PPPoE, static IP) and entering your ISP-provided credentials. Refer to your router's manual or your ISP's instructions. Some routers may automatically configure this.

  6. Test your internet connection: Once connected, check if you have internet access on your devices.

Troubleshooting

  • No Internet Access: Double-check all cable connections. Verify your router's WAN settings and your ISP-provided credentials. Restart both your ONT and router. Contact your ISP's support if the problem persists.

  • ONT Issues: If the ONT is malfunctioning, contact your ISP for assistance.

  • Router Compatibility: Ensure your router is compatible with fiber internet. Most modern routers are.

Example Scenario

Let's say your ISP provides you with an ONT that has one Ethernet port. You'll connect the fiber cable to the ONT as instructed by your ISP, then connect one end of an Ethernet cable to the ONT's Ethernet port and the other end to your router's WAN port. You then power on both devices and configure your router according to your ISP's instructions.

Related Articles