Based on the provided reference, specific settings for a 30W fiber laser are recommended when aiming to achieve a white mark on aluminum.
Recommended 30W Fiber Laser Settings for White Marking on Aluminum
To produce a white marking effect on aluminum using a 30W fiber laser marker, the following settings are suggested by the reference:
- Power: 100%
- Speed: 2000 mm/s
- Angle: 90 degrees
- Freq: 55 kHz
- Hatch: 1 (Hatch count)
- Loop: 1 (Loop count)
- Line Space: 0.03 mm
These settings are designed to create the desired white contrast on the aluminum surface. Adjustments might be necessary depending on the specific type of aluminum alloy and the desired quality of the mark.
Settings Summary Table
For easy reference, the settings are summarized in the table below:
| Parameter | Setting | Unit |
|---|---|---|
| Power | 100 | % |
| Speed | 2000 | mm/s |
| Angle | 90 | Degrees |
| Freq | 55 | kHz |
| Hatch | 1 | Count |
| Loop | 1 | Count |
| Line Space | 0.03 | mm |
Using these parameters provides a starting point for achieving effective white marking on aluminum with a 30W fiber laser system.
