To remove the back of a lift chair, you typically locate specific release tabs and disengage them.
Removing the back of a lift chair is often necessary for moving, cleaning, or repairing the chair. While designs can vary slightly between manufacturers, a common method involves releasing locking mechanisms, often tabs or levers, found where the backrest connects to the base of the chair.
Based on the provided reference, a method involves:
- Locating Release Tabs: Find the tabs or levers on the back frame of the chair where it attaches to the base. These are often visible from the back or sides of the chair near the bottom of the backrest connection.
- Disengaging the Tabs: Stick your thumbs or any finger underneath these tabs.
- Pulling Outwards: While holding or pulling the tabs, simultaneously pull the backrest outwards. The reference specifically states, "Stick your thumbs underneath those tabs. Here or any finger. And pull outwards at the same time like I am like this. And you do that on both sides of the back. Rest."
- Repeat on Both Sides: This action must be performed on both sides of the back connection to fully release the backrest.
- Lift and Remove: Once both sides are disengaged, the backrest should be free to lift away from the chair base.
Here's a simple breakdown:
- Identify the locking tabs or levers at the base of the chair's back frame on both sides.
- Insert your fingers or thumbs underneath these tabs.
- Pull the tabs outwards away from the chair base.
- Simultaneously pull the backrest outwards to detach it.
- Repeat steps 2-4 on the opposite side of the backrest connection.
- Carefully lift the backrest straight up and away from the chair base.
Always consult your specific chair's user manual or manufacturer's instructions if available, as some models may have different release mechanisms, such as bolts, pins, or alternative lever systems. Ensure the chair is unplugged and in a safe position before attempting to remove the backrest.
