To begin disassembling a La-Z-Boy electric recliner, the most common initial step, often useful for moving or repair, involves removing the chair back.
Removing the Chair Back
Disassembling the back of your La-Z-Boy electric recliner is a process that typically requires just a few simple tools and careful handling. The back is usually attached via locking brackets that can be released.
Here are the key steps based on the provided information:
- Locate the Release Point: Find the space between the outside back and the arm of the chair on both sides.
- Insert Tool: Insert a flat screwdriver into this space.
- Release Levers: Carefully pry the back bracket, locking levers up using the screwdriver until they are unlocked. You will likely need to do this on both sides.
- Position the Back: Stand behind the unit and pull the chair back to its upright position. Ensure it's securely upright before proceeding.
- Lift and Remove: With the back upright and levers unlocked, gently rock the recliner from side to side in an upward motion. While rocking, pull the back up and off the base.
| Step | Action | Tool Required |
|---|---|---|
| 1. Locate | Space between back and arm | None |
| 2. Insert | Flat screwdriver into the space | Flat Screwdriver |
| 3. Release | Pry locking levers up until unlocked | Flat Screwdriver |
| 4. Position | Pull chair back to upright position | None |
| 5. Remove | Rock side-to-side while pulling up and off | None |
Note: This process primarily covers removing the chair back. Complete disassembly of an electric recliner involves disconnecting wiring, motors, and other components, which can be complex and varies by model. Always consult your specific model's manual if available.
