Adjusting glass-to-glass hinges involves a few key steps, primarily focusing on screws and, in some cases, activating a pin to fine-tune the door's position.
Adjusting Glass-to-Glass Hinges
Here's a breakdown of the adjustment process:
Step-by-Step Adjustment Process
- Locate the Adjustment Screws: Glass-to-glass hinges typically have screws that allow for adjustments. These screws are usually found on the hinge body itself.
- Loosen the Screws: Using the appropriate screwdriver, gently loosen the adjustment screws. Do not remove them completely. Loosening allows the hinge to move slightly.
- Adjust the Door Position: Once the screws are loosened, you can manually adjust the position of the glass door. This may involve aligning it with another glass panel or adjusting its swing.
- Tighten the Screws: After making the necessary adjustments, tighten the screws to secure the hinge and hold the door in the new position.
- Reattach the Cover Plate: After adjustments are complete, according to the reference video, open the hinge back to its original position and reattach the inside cover plate.
Special Adjustment: 5-Degree Pin Activation
Some glass-to-glass hinges feature a 5-degree adjustment pin for fine-tuning. Here is how to use it:
- Locate the Pin: Identify the small pin mechanism on the hinge.
- Activate the Pin: The pin needs to be activated to engage the 5-degree adjustment. The video referenced, FHC Glass-to-Glass Hinges: Activating the 5 Degree Pin - YouTube, shows how the pin works.
- Adjust the Door Angle: Once the pin is activated, you can make minor adjustments to the door's angle. This provides very precise alignment.
Additional Tips
- Do Not Overtighten: Avoid over-tightening the screws, as this can damage the hinge or the glass.
- Use the Correct Tools: Always use the correct screwdriver size to avoid stripping the screw heads.
- Check Alignment: After each adjustment, double-check the alignment and swing of the door.
- Professional Help: If you are unsure about adjusting the hinges, consult with a professional installer.
By carefully adjusting the screws and, where applicable, activating the 5-degree pin, you can achieve the desired alignment and smooth operation of your glass-to-glass doors.
