Making glitter ornaments using hairspray is a popular craft project that results in beautiful, sparkling decorations. Based on the provided reference, the process involves preparing bauble halves, applying hairspray, adding glitter, and then assembling the ornament.
Here is a step-by-step guide derived from the reference:
Materials You Might Need
- Clear bauble halves (the type that snap together)
- Hairspray (aerosol can works well)
- Glitter of your choice
- Sealant (optional, but recommended)
- Lint-free cloth or paper towel
- Small brush or tool for cleaning join lines
- Vinyl decals (optional)
Step-by-Step Process
Follow these steps to create your glitter bauble ornaments:
-
Step 1) Clean the inside of the bauble.
- Begin by ensuring the interior surface of each bauble half is clean and free from dust, fingerprints, or debris. A quick wipe with a dry, lint-free cloth or paper towel should suffice. A clean surface helps the hairspray adhere properly.
-
Step 2) Spray the hairspray.
- Working with one bauble half at a time, lightly spray the inside surface with hairspray. The hairspray acts as the adhesive that the glitter will stick to. Aim for an even, light coating – too much can cause pooling.
-
Step 3) Add the glitter.
- Immediately after spraying, while the hairspray is still wet and tacky, pour or spoon glitter into the bauble half. Swirl and gently shake the bauble half to coat the entire interior surface evenly with glitter.
- Tap out any excess glitter onto a sheet of paper (which you can then funnel back into the glitter container).
-
Step 4) Add a second coat if needed.
- Examine the glitter coverage. If there are bare spots or you desire a more opaque glitter finish, you can carefully apply another light layer of hairspray to the inside and repeat Step 3 with more glitter.
-
Step 5) Seal the glitter.
- Once you are satisfied with the glitter coverage and the hairspray has dried slightly, consider applying a sealant over the glitter layer. This helps to lock the glitter in place and prevent shedding, keeping your ornament looking neat for longer. Allow the sealant to dry according to product instructions.
-
Step 6) Apply the vinyl decals.
- (Note: This step is listed in the reference. Decals are typically applied outside the ornament after assembly, but the reference places it here. You can apply them to the outside of the finished, assembled bauble if preferred). If you are adding vinyl decals, apply them according to the decal instructions, either to the bauble halves or the completed bauble.
-
Step 7) Clear away excess glitter from the join lines.
- Before joining the two halves, carefully inspect the edges and join lines of each bauble half. Use a small, dry brush or tool to gently remove any glitter that may have settled along these edges. This ensures that the halves will fit together cleanly and securely.
-
Step 8) Join the two halves of the bauble.
- Align the two glitter-filled bauble halves and carefully snap or secure them together to form the complete ornament. Ensure they are firmly closed.
By following these steps, you can effectively use hairspray to create glitter-covered ornaments using snap-together baubles.
